ID Services, Inc.

Home Products Contact Us Directions About Us Support

.........................................

ID Card Products

   Accessories

           Badge Reels

           Card Holders

           Clips and Pins

           Misc. Accessories

           Lanyards

           Slot Punches

   Cameras

   Card Printers

   Printing Service - On-Line

   Software

Imprinters and Supplies

 

Medical Products

   Patient ID Systems

   Label Printers

   Wristbands

Metal Products

   Engravers

   Embossers

   Tags and Plates

Plastic Card Products

   Blank Plastic Cards  

   Card Printers

   Embossers

   Magnetic Stripe Readers

   Plastic Card Security

   Printed Cards

   Smart Cards

Ribbon Definitions

 

 

Fits in tight places.
The MiniMag Intelligent Swipe Reader is designed for POS and desktop applications where space is at a premium. The entire unit is just 90mm long (about the length of a credit card), giving it the smallest footprint of any unit with comparable features.

Edits and formats data.
The MiniMag is a fully intelligent swipe reader that can be programmed to divide, rearrange, edit, and validate fields of magnetic card data. It automatically distinguishes between AAMVA and CA DMV formats.

Reads magnetic stripes.
The MiniMag reads up to three tracks of information with a single swipe in either direction. Its standard-length slot makes it easy to use. Both beeper* and LED indicators signal a successful read.

Versatile, low cost.
The MiniMag Intelligent Swipe Reader delivers exceptional functionality and value in the smallest possible package. It can be used as a free-standing unit, or permanently mounted using the threaded inserts in the bottom of the reader. (The cable can exit through the bottom as well.) TTL, RS-232, keyboard wedge, and USB/Keyboard interfaces are available.

* Beeper not available with port-powered model.

IDT 3321/31 MiniMag Intelligent Swipe Reader Specifications
 

 

 
Magnetic TTL: Power +5 VDC +/-10% (50mV ripple maximum).
Ground 0 VDC (GND).
Chassis ground connected to GND and magnetic head case.
 
Operating Current: 15mA maximum for undecoded magnetic stripe only (3 tracks), TTL.
35mA additional for decoded with keyboard or RS-232 interface.
5.5mA typical with LED (<8mA at peak usage) for port-powered model.
 
External Power Supply: 5 VDC/350mA (required for RS-232 version only).
Port-powered option requires no power supply.
 
 
Operating Temperature: 32°F to 131°F (0°C to 55°C ).
Storage Temperature: -22°F to 158°F (-30°C to 70°C ).
Humidity: Maximum 95% non-condensing.
 
Electronics MTBF: Read electronics, magnetic: 125,000 POH..
Interface electronics, RS-232/keyboard: 125,000 POH.
 
Magnetic Head Life: 1,000,000 passes minimum.
 
Rail and Cover Life: 1,000,000 passes minimum.
 
Read Rate: Less than one error in 100,000 bits on cards conforming to ISO 7811 1-5 (not induced by operator error).
 
Warranty: One year, parts and labor.
 
 
Magnetic Stripe Formats: ISO 7811, AAMVA, and CA DMV.
 
Swipe Speed: 3 to 55 inches per second, bi-directional. (5 to 50 inches per second for port-powered model.)
 
Card Width: .01 to .055 inches.
 
Slot Width: Maximum card thickness: .055 (1.37mm).
 
Indicators: Tri-colored LED, beeper (not available on port-powered model).
 
Interfaces: RS-232, Keyboard wedge, USB/keyboard, TTL (undecoded magnetics). Port-powered option is RS-232 only.
Dimensions: Length: 3.54 inches (90mm). Width: 1.34 inches (34mm).
Height: 1.10 inches (28mm).
Weight: Approximately 4.6 oz.
 
Cable Length: 6-foot straight cable. (Cable exit through the bottom of the unit is available as an option; minimum quantities apply.)
 
Connector: Keyboard: Combination 5 pin/6 pin DIN.
TTL: 9 pin squeeze. RS-232: DB9F

 

About Us  Contact Us  Home  Map/Directions  Products  Search