ID Services, Inc.

Home Products Contact Us Directions About Us Support

.........................................

ID Card Products

   Accessories

           Badge Reels

           Card Holders

           Clips and Pins

           Misc. Accessories

           Lanyards

           Slot Punches

   Cameras

   Card Printers

   Printing Service - On-Line

   Software

   Systems

Imprinters and Supplies
Indenters

Medical Products

   Patient ID Systems

   Label Printers

   Wristbands

Metal Products

   Engravers

   Embossers

   Tags and Plates

Plastic Card Products

   Blank Plastic Cards  

   Card Printers

   Embossers

   Magnetic Stripe Readers

   Plastic Card Security

   Printed Cards

   Smart Cards

Ribbon Definitions


 

 

Reads magnetic stripes.
The EasyMag reads up to three tracks of information with a single swipe in either direction. Its length makes it exceptionally tolerant of bent or otherwise imperfect cards. Both beeper and LED indicators signal a successful read.

Versatile, low cost.
The EasyMag Intelligent Swipe Reader delivers exceptional functionality and value. It can be used as a free-standing unit, velcro mounted for temporary placement, or permanently mounted using the threaded inserts in the bottom of the reader. TTL, RS-232, keyboard wedge, and USB/Keyboard interfaces are available.

Easy to use.
The EasyMag Intelligent Swipe Reader is designed for busy retail environments where speed and dependability are equally important. Its standard-length slot (more than 5 inches) makes it easy for anyone to swipe a card and get a good read on the very first try. Yet its unique flat-edge case design makes it easy to flush-mount alongside a keyboard or monitor.

Edits and formats data.
The EasyMag is a fully intelligent swipe reader that can be programmed to divide, rearrange, edit, and validate fields of magnetic card data. It automatically distinguishes between AAMVA and CA DMV formats.

WCR3321/31XXQ EasyMag Intelligent Swipe Reader Specifications
 

 

 
Keyboard: Low Power CMOS power supplied by the host computer.
RS-232: 5VDC/70mA (power adapter regulated 5VDC/350mA or equivalent).
 
Operating Temperature: 32F° to 131°F (0°C to 55°C).
Storage Temperature: -22° F to 158°F (-30°C to 70°C).
Humidity: Maximum 95% non-condensing.
 
Electronics MTBF: Read and Interface electronics, RS-232/keyboard: 125,000 POH.
Magnetic Head Life: 1,000,000 passes minimum.
Rail and Cover Life: 1,000,000 passes minimum.
Read Rate: Less than one error in 100,000 bits on cards conforming to ISO 7811 1-5 (not induced by operator error).
Warranty: One year, parts and labor.
 
Magnetic Stripe Formats: ISO 7811, AAMVA, and CA DMV.
Swipe Speed: 3 to 55 inches per second, bi-directional.
Card Width: .01 to .055 inches.
Slot Width: Maximum card thickness: .055 (1.37mm).
Interfaces: TTL (undecoded magnetics), RS-232, Keyboard wedge, USB/keyboard.
Dimensions: Length: 5.22 inches (133mm). Width: 1.25 inches (32mm).
Height: 1.6 inches (41mm).
Weight: Approximately 8 oz. (with cabling).
Cable Length: 5-foot straight cable.
Connector: Keyboard: 5- pin DIN connector (AT/XT).*
6-pin mini-DIN connector (PS/2).*
ADB adapter cable required (Mac). RS-232: 9-pin D-sub female.

*All units come with adapter for AT/XT or PS/2
Mounting Options: Rubber feet (stand-alone operation).
Velcro pads (keyboard mounting).
Two mounting holes (permanent mounting).

 

About Us  Contact Us  Home  Map/Directions  Products  Search