|
available options |
Infill device in front version (font OCR B1) or in rear (font OCR A1 or
MasterCard). Auxiliary printer port. Chip contact initializing. Floor
stand unit for Pro-Series. |
|
built-in tipper unit |
Off-line tipping possibility (11 lines). Ribbon saving feature. |
|
communication interface |
Serial RS232 port. |
|
dimensions and weight |
860
x 480 x 350 mm x 62 kg. (34"x19"x13,75"x138 lbs) |
|
drum capacity |
Drum capacity: 105 characters, embossing and/or infill. |
|
electrical requirements |
117
V / 60 Hz -220 V / 50 Hz. |
|
input hopper capacity |
200
cards. Pre-embossed card automatic feed feature. |
|
magnetic stripe encoding |
3
Tracks ISO 7811, LoCo-MeCo/HiCo. |
|
output hopper capacity |
200
embossed cards. Reject hopper. |
|
performance |
Approx. 500 CPH. Multi Parallel Processing System: 3 cards
simultaneously processed. |
|
software |
Windows based application software. Firmware: self diagnostic,
selectable automatic repeat card, pre-embossed card reading with full
post processing of the same card, resettable and non resettable
counters. System status and diagnostic messages reported on PC. Optional
LinkWare application for in-line operation with other Pro-Series
modules. |
| |
|
 |
